You are here:

Selecting Add Time to Recycled Parts

Use this screen to add not-included operations time to the estimate. This screen displays a list of Not-Included Operations that you can add to your estimate.

To add time to a recycled part

Open the workfile.
Select the Estimate tab, and then select the Lines tab.
If your estimating rules are set to automatically display recycled parts, select the Replace, Section, or Recy button. The Select Recycled Parts screen opens.

- or -

If your estimating rules are not set to automatically display recycled parts, select the Recy button. The Select Recycled Parts Data screen opens.
Select a recycled part from the Recycled Assembly list.
Select the Add Time tab.
Select the additional operations, and then click OK.

To add time to a recycled part 2

Open the workfile.
Select the Estimate tab, and then select the Lines tab.
Select the Compare button from the Operations toolbar. The Estimate Line Properties - Comparison screen opens.
From the Part Type column, select the button to the right of the Recycled label. The Select Recycled Parts Data screen opens.
Select the Add Time button.
Select the additional operations, and then click OK.

Note: If Recycled Assemblies Collision Estimating Guide data is not available or is not setup on your computer, you will not be able to access this screen.

Screen Description

Select Recycled Parts Screen